Call Martin today to discuss your Peugeot project: 07525 440344

 

PRD-125edit

PR-DEVELOPMENTS

SPECIALIST ENGINEERING FOR THE PEUGEOT 205 & 309 GTI

Built through experience, not convention.

Founded in 2003 and based near Chester, PR-Developments is a specialist engineering workshop dedicated to the Peugeot 205 and 309 GTi.

Built from over 25 years of hands-on Peugeot development, PRD combines classic analogue character with modern engineering, vehicle wiring, engine management, fabrication and performance innovation.

With over 60 hand-built vehicles completed, PRD has built a reputation for engineering-led solutions, bespoke development and complete vehicle builds.

PRD bridges the gap between traditional Peugeot engineering and modern motorsport electronics, allowing classic platforms to evolve far beyond their original limitations while retaining the character that made them iconic.

All engineering, wiring, fabrication and development work is carried out in house. 

Humble Little 1.6 Into An Awesome Mi16

Martin is probably the most knowledgeable engineer I know when it comes to 205gti’s. His work ethic and attention to detail is second to none. He has transformed my humble little 1.6 into an awesome Mi16 beast which is amazing to drive. Faultless service from a good old fashioned car engineer.
5.0
2018-05-04T01:23:21+01:00
Martin is probably the most knowledgeable engineer I know when it comes to 205gti’s. His work ethic and attention to detail is second to none. He has transformed my humble little 1.6 into an awesome Mi16 beast which is amazing to drive. Faultless service from a good old fashioned car engineer.

He completed the work before I even realised

I recently got my oil pump refurbished by Martin. He was happy to talk with me about the condition of my pump beforehand to help me decide whether to refurbish or replace it. After sending it to him, he completed the work before I even realised it had been delivered and sent back to me in record time! Shortly after he checked that I had received the pump safely and talked me through what he had done, showing great knowledge and attention to detail. Thank you, Martin!
5.0
2020-10-04T20:27:04+01:00
I recently got my oil pump refurbished by Martin. He was happy to talk with me about the condition of my pump beforehand to help me decide whether to refurbish or replace it. After sending it to him, he completed the work before I even realised it had been delivered and sent back to me in record time! Shortly after he checked that I had received the pump safely and talked me through what he had done, showing great knowledge and attention to detail. Thank you, Martin!

Knows his Peugeot’s inside and out

Martin is a very knowledgeable and helpful engineer and knows his Peugeot’s inside out. Went above and beyond with an engine swap and dry-sump fitment in my 306, and continues to be a valuable source of advice and wisdom!
5.0
2020-10-04T20:21:07+01:00

Ian dyer

Martin is a very knowledgeable and helpful engineer and knows his Peugeot’s inside out. Went above and beyond with an engine swap and dry-sump fitment in my 306, and continues to be a valuable source of advice and wisdom!

Best introduction for my 205 I could have ever hoped for!

I had owned my 205 for a couple of years and it started to develop a few niggles and I wanted to find a specialist to do some work on it for me. I was put on to Martin and it was quite possibly the best introduction for my 205 I could have ever hoped for!
5.0
2020-10-04T20:33:55+01:00
I had owned my 205 for a couple of years and it started to develop a few niggles and I wanted to find a specialist to do some work on it for me. I was put on to Martin and it was quite possibly the best introduction for my 205 I could have ever hoped for!

Plug & Play – Fantastic Quality of Work & Customer Service

Had a my loom converted from a 205 1.9 8 v to mi 16 loom for use on carbs but using the mi 16 electronic ignition system by these guys fantastic service and when I got the loom back it was just plug and play a fantastic quality of work and customer service was fantastic I highly recommend there work
5.0
2018-05-04T01:25:24+01:00
Had a my loom converted from a 205 1.9 8 v to mi 16 loom for use on carbs but using the mi 16 electronic ignition system by these guys fantastic service and when I got the loom back it was just plug and play a fantastic quality of work and customer service was fantastic I highly recommend there work

Car has ever been so reliable and runs silky smooth top work !

Mark Kasey

Sent my 205 gti to Martin for engine loom to be stripped, checked and correctly put back together. Also had bottom end rebuilt while it was there . Martin is more than helpful and a great person to send your 205s to . Car has never been so reliable and runs silky smooth 👌 top work !
5.0
2021-04-06T19:25:52+01:00
Mark Kasey Sent my 205 gti to Martin for engine loom to be stripped, checked and correctly put back together. Also had bottom end rebuilt while it was there . Martin is more than helpful and a great person to send your 205s to . Car has never been so reliable and runs silky smooth top work !

He smashed it out of the park

Took my Megane r26 to martin at PRD for a large amount of work doing. he smashed it out of the park and went the extra mile. would highly recommend him
5.0
2020-10-04T20:28:08+01:00
Took my Megane r26 to martin at PRD for a large amount of work doing. he smashed it out of the park and went the extra mile. would highly recommend him
5
7